Top 10 Torx Driver Set – Gunsmithing Tools

As an Amazon Associate I earn from qualifying purchases.

1. Wheeler


Wheeler 30 Piece SAE/Metric Hex and Torx P-Handle Set for Pistol Rifle Handgun Gunsmithing Rebuild and Maintenance

Wheeler #ad - Includes sae hex bits-standard 3/32" and standard 7/64" and ball 1/8", 5/32", 3/16", 9/64", 7/32", 1/4", 5/16", 3/8". Included components: 30 Piece Screwdriver Set. 30 piece p-handle driver set sae/metric Hex and Torx. Comes with a molded stand that can sit on bench top or has mounting holes on back for hanging. Includes metric hex bits: standard 1. 5mm, 2. 5mm, 4mm, 6mm, 8mm, 7mm, ball 2mm, 5mm, 3mm, 10mm. Includes torx bits: t7, t30, t15, t20, t8, t25, t10, t27, T9, T40.
BrandWheeler #ad
ManufacturerBattenfeld Technologies #ad
Height7 Inches
Length16 Inches
Weight6.56 Pounds
Width9 Inches
Part Number1081957

2. Wheeler


Wheeler Engineering Gunsmithing Screwdriver Set with Durable Construction and Storage Case for Gunsmithing and Maintenance

Wheeler #ad - Ease of use: hollow-ground bits have a concave shape that allows for insertion all the way into the screw slot for maximum contact. Versatile: wheeler’s engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation. Includes: 2 non-slip, over molded plastic handles with a convenient hinged storage case. Durable: constructed of strong, S2 tool steel. Features: 54 hollow-ground flat bits, 15 specialty bits, 3 Torx, 4 phillips, 8 Allen, 1 2 ¼ shaft extension and 1 hex-to-square drive adapter.
BrandWheeler #ad
ManufacturerBattenfeld #ad
Height3 Inches
Length12.75 Inches
Weight2.2 Pounds
Width8.25 Inches
Part NumberWH562-194

3. Wheeler


Wheeler Professional Gunsmithing Screwdriver Set 43-Piece

Wheeler #ad - Durable: constructed of strong, S2 tool steel. Includes: 2 non-slip, overmolded plastic handles. Ease of use: hollow-ground bits have a concave shape allowing for maximum contact in the screw slot. Convenient: Includes a storage case. Versatility: Features 21 hollow-ground flat bits.
BrandWheeler #ad
ManufacturerBattenfeld Technologies #ad
Height3 Inches
Length9 Inches
Weight0.88 Pounds
Width9 Inches
Part Number954621

4. Kershaw


Kershaw TX-Tool TXTOOL; 4.8 in. Single-Position Multifunction Magnetic Bit Driver; Includes T-6, T-8, T-10, 2 Phillips and Slotted Screwdriver Bit; 1.1 oz, Black

Kershaw #ad - Works on all Kershaw pocket clips to make position adjustments. Strong aluminum body construction is lightweight, and includes a knurled strip near the tip for better gripping power while tightening and loosening hardware. All bits store conveniently inside the TX-Tool's handle. Switch a pocketclip, tighten a screw, or adjust the pivot tension with the TX-Tool.
BrandKershaw #ad
ManufacturerKershaw Sporting Goods #ad
Height1.5 Inches
Length5 Inches
Weight0.2 Pounds
Width4.5 Inches
Part NumberTXTOOL
WarrantyManufacturer warranty

5. SOG


SOG Multitool with Hex Driver Set, Baton Q4 EDC Multi Tool Kit with Pliers, Pocket Knife, Torx and Hex Screwdriver Set with 12 Bits ID1031-CP

SOG #ad - 7 inches, lightweight multi tool kits; this all in one tool refines the average outdoor and camping multitool with a sleek, 6 OUNCES: One of the world’s most compact, lightweight design. A sog multitool for life: take care of your EDC multitool and we’ll take care of you; we gladly consider repairs and replacements for properly maintained SOG Baton gear.

Pocket multitool and screwdriver bit set: the SOG Baton Q4 is a small tool kit, a magnetic hex tool and Torx screwdriver set; includes bottle opener, can opener, pliers and wire cutter. Stainless steel pocket tools: this survival kit includes a multitool pocket knife made with 5Cr15MoV steel; lightweight multipurpose tool features an anodized aluminum handle.

A home tool kit for your edc gear: these edc tools serve as a Torx tool set for computers, phones and even a gun multitool; multi tool pocket knife, pliers and torx screwdriver set stows easy in the included custom leather case.
BrandSOG #ad
ManufacturerSOG Specialty Knives & Tools #ad
Height0.7 Inches
Length2.7 Inches
Weight0.38 Pounds
Width5.8 Inches
Part NumberID1031-CP



Extension Bar & Storage Box, PRO BIKE TOOL 1/4 Inch Drive Click Torque Wrench Set – 2 to 20 Nm – Bicycle Maintenance Kit for Road & Mountain Bikes, Includes Allen & Torx Sockets

PRO BIKE TOOL #ad - Between 5 & easy to use & 20 Nm the click will be stronger. Includes individual certificate of calibration with each set. Helps ensure that the fittings on your bike are tightened to the correct torque, seat clamps, and that clamping forces are distributed evenly across clamping surfaces.

Ideal for use on stems, chain sets, lever clamps, rotors and headsets. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Professional quality – each hand tool is fully calibration tested for accuracy to iso 6789-2:2017 and din en iso 6789-1:2017-07 requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.

Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% clockwise and +/- 6% counter clockwise. Important: at low nm settings under 5 Nm the click can be ‘subtle’. Precision torque measurement - install components with calibrated precision - 2. 0 to 200 newton meter torque range with micro adjustment to 01. High-contrast Nm scale is easy to read. Right tools for the job – includes hex: h2, h6, h8, h10.
ManufacturerPro Bike Tool #ad
Part NumberTWS-220

7. Park Tool


Park Tool ATD-1.2 Adjustable Torque Driver – 4-6Nm

Park Tool #ad - Assembled and calibrated at our factory in Minnesota. Limits torque applied to fasteners, preventing over-tightening and damage to lightweight bicycle components. 1/4 inch hex drive - includes 3, 4, 5mm and T25 bits stored in the handle. Hand-adjustable to 4, 5. 5, 5, 4. 5, or 6 Nm. All-metal internal construction with a comfortable, ergonomic composite molded grip.
BrandPark Tool #ad
ManufacturerPark Tool #ad
Height2 Inches
Length7 Inches
Weight0.67 Pounds
Width5 Inches
Part NumberATD-1.2



LEATHERMAN, Built in the USA, Bit Kit, 21 Double-Ended Screwdriver Bits for Multitools

LEATHERMAN #ad - Fits your needs: sometimes you don't need the whole kit; Customize your Leatherman by carrying only what you need when you need it. Built for real life: made from hardened steel designed specifically for tool bits, they'll stand up to any challenge real-life throws at you.

Goes anywhere: it's an entire toolbox in the palm of your hand; Tuck it into your sheath, pocket, glove box or tackle box so you can be well-equipped no matter where you go. Ready for anything: with your know-how, your multitool and your bit kit, you'll be prepared for anything. Let's be practical: leatherman's flat bit design means all the performance of a standard hex bit in half the size; With 21 double-headed bits in two small sleeves, you can fit more practicality in your pocket.
ManufacturerLeatherman #ad
Height8 Inches
Length4.5 Inches
Weight0.1 Pounds
Width1 Inches
Part Number931014

9. Wheeler


Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Gunsmithing and Maintenance, Bits and Storage Case for Scope Mounting

Wheeler #ad - Includes: 10 bits hex to square adapter, #10 flat blade, #11 flat blade, t20 torx, 5/32 hex, 3/32 hex, t15 torx and leupold specialty flat blade, 7/64 hex, #32 flat blade, ¼” socket and a convenient plastic storage case.

Reliable: torque adjustment range from 10 inch/pounds to 65 inch/pounds. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell “C”. Accuracy: +/- 2 inch/pounds up to 40 inch/pounds; 40 – 65 is +/- 5%. Ease of use: apply, accurate torque settings to scope rings, guard screws, repeatable, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
BrandWheeler #ad
ManufacturerWheeler #ad
Height3.07 Inches
Length3.23 Inches
Weight0.5 Pounds
Width6.06 Inches
Part Number553556

10. Park Tool


Park Tool FWS-2 Fold-Up Bike Wrench Set – 1.5 to 6mm Hex Wrenches & T7 to T40 Star Drivers

Park Tool #ad - Tws-2 features t7, t15, t10, t27, t25, t9, t20, t30 and T40 star-shaped wrenches. Aws-10 features 1. 5mm, 2mm, 4mm, 2.5mm, 5mm, 3mm, and 6mm hex wrenches with chamfered tips. Wrenches made from industrial tool steel, through hardened and tempered for long life. Multi-position composite handles are comfortable, slip-resistant, lightweight, and 40% stronger than steel handles. Two wrench set covers the vast majority of bolts and fittings found on a bicycle.
BrandPark Tool #ad
ManufacturerPark Tool #ad
Height2 Inches
Length7 Inches
Weight0.55 Pounds
Width3 Inches
Part NumberFWS-2
WarrantyLimited Lifetime Warranty - see