As an Amazon Associate I earn from qualifying purchases.
Case Club #ad - Extended front handle length helps counter balance off center weighted loads. Wide bodied snap latches can be used with thick gloves. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Quickly convert it back to the 4 pistol version anytime by putting the module back in.
Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Case has a lifetime warranty, mil-spec, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear.
Case Club #ad - Base foam is heavy duty, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Easily convert the case from a 4 pistol & accessory version to a 4 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. All latch & hinge pins are stainless steel.
Case is 100% shippable and airline approved for TSA checked luggage. Quickly convert it back to the 4 pistol & accessory version anytime by removing the modules. Wide bodied snap latches can be used with thick gloves. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Adding 1 module increases magazine capacity to 21 while adding both modules increases it to 29. Extended front handle length helps counter balance off center weighted loads. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Holds 4 pistols and up to 29 magazines with magazine modules or 12 magazines with accessory pocket +5 more in the magwells.
Case Club #ad - Built in molle straps allow you to attach extra gear to the outside. The foam cradle is designed to fully protect and hold 4 handguns up to 8 5/8" in overall length.
Case Club #ad - Extended front handle length helps counter balance off center weighted loads. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure. Quickly convert it back to the 5 pistol version anytime by putting the module back in.
All latch & hinge pins are stainless steel. Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths.
Wide bodied snap latches can be used with thick gloves. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Case has a lifetime warranty, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner.
Case Club #ad - Holds up to 4 semi automatic pistols plus accessories. This product is only the case with foam. Comes with handy cutting blade for easy modifications.
Can accommodate underbarrel attachments such as flashlights or lasers. Not intended for revolvers. Pistols and accessories not included. Do not settle for cheap and flimsy diced foam! diced foam tears easily, collects dirt, lasts a lifetime, can be cleaned easily, retains water rust!, and even if left untouched will eventually DISINTEGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does not tear easily, and will NOT disintegrate.
Case Club #ad - Holds up to 4 revolvers & included silica gel. Foam insert is closed cell military grade polyethylene which can be wiped clean. Case is airline Approved for checked luggage & padlockable. Max length of revolvers is 12 1/4. Case has a lifetime warranty & is 100% Waterproof, & Dustproof.
Case Club #ad - Customizable lid hold down blocks that can be adjusted for each gun. Case fits x4 rifles or shotguns under 41" in overall length, x24+ Pistol Magazines, x12 Rifle Magazines, x3 Semi-Auto Pistols, and x1 Moisture Absorbing Silica Gel Canister Included.
Case has wheels. Two padlock points that support a customer supplied padlock with a 1/4" shackle. Accommodates optics including scopes & under barrel attachments, Pistol optics & red-dots, and Grip fins & lasers, foregrips including vertical foregrips and angled foregrips, under barrel attachments including flashlights & featureless rifles.
Case will likely not fit large side attachments, Side by Side Barrels, Bipods, or Large bolts that stick out the side. Max overall gun height is 11. 13". 100% waterproof IP67 & Dustproof. Case has a lifetime warranty. Foam is heavy duty, mil-spec, non-abrasive, pre-cut, closed cell polyethylene which won't absorb moisture or oil. Case is 100% shippable and airline approved for TSA checked luggage.
Case Club #ad - Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
Dual purpose foam design allows for two different configurations for the price of one! Extended front handle length helps counter balance off center weighted loads. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
Magazine compartments are dual level & double stack mags of varying lengths. Base foam is heavy duty, closed cell polyethylene which won't absorb moisture or oil. Case has a lifetime warranty, mil-spec, non-abrasive, pre-cut, is 100% waterproof ip67 & will fit both single & Dustproof with a built-in pressure release valve. Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Holds 6 pistols, 21 magazines +6 more in the magwells & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust.
MY CASE BUILDER #ad - Built to last: each case has a lifetime warranty, is IP 67 rated and dustproof; Our heavy duty carrying cases are made in Italy and are great for storage, traveling, or taking with you to the shooting range.
Lightweight & strong: heavy duty injection molded case is impact and crush resistant yet lightweight for easy transport; Can fit multiple handguns, magazine clips, pistols, your favorite extensions, and other firearm accessories.
Tsa approved: our dual-padlockable case Fits 0313" shackle is travel-friendly and compliant with TSA regulations for flying with firearms. Ip67 rated: waterproof, dustproof and airtight with pressure equalization valve.
MY CASE BUILDER #ad - Tsa approved: our dual-padlockable case Fits 0313" shackle is travel-friendly and compliant with TSA regulations for flying with firearms. Lightweight & strong: heavy duty injection molded case is impact and crush resistant yet lightweight for easy transport; Can fit multiple handguns, your favorite extensions, magazine clips, pistols, and other firearm accessories.
Built to last: each case has a lifetime warranty, is IP 67 rated and dustproof; Our heavy duty carrying cases are made in Italy and are great for storage, traveling, or taking with you to the shooting range.
Ip67 rated: waterproof, dustproof and airtight with pressure equalization valve. Military grade foam: keep your firearm safe and sound with our premium 4 pistol and 12 magazine carry case; Each case features a heavy-duty Doro hard case with a customizable closed-cell polyethylene foam insert; Foam is chemical and oil resistant and can be easily wiped clean.
1. Case Club
#adCase Club 4 Pistol and 16 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adMax length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones.
More information #ad
Dual purpose foam design allows for two different configurations for the price of one! Holds 4 pistols, 16 magazines +4 more in the magwells & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Case has a lifetime warranty, mil-spec, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC540SEPIS4 |
More information #ad
2. Case Club
#adCase Club 4 Pistol and up to 29 Magazine with Accessory Pocket Pre-Cut Heavy Duty Waterproof Case with Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adCase is 100% shippable and airline approved for TSA checked luggage. Quickly convert it back to the 4 pistol & accessory version anytime by removing the modules. Wide bodied snap latches can be used with thick gloves. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths.
More information #ad
Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Dual purpose foam design allows for three different configurations for the price of one! Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Adding 1 module increases magazine capacity to 21 while adding both modules increases it to 29. Extended front handle length helps counter balance off center weighted loads. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Holds 4 pistols and up to 29 magazines with magazine modules or 12 magazines with accessory pocket +5 more in the magwells.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC720SEPIS4A |
More information #ad
3. Case Club
#adCase Club Tactical Pre-Cut 4-Pistol Backpack with Rainfly & Molle Straps Gen 2
#adMore information #ad
Hands free transportation to and from the range or on the trails. Twin side pockets store 6 extra magazines each along with all your gear. Pull-out rain cover protects gear in case of a sudden downpour.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCCBPACKPIS4G2 |
More information #ad
4. Case Club
#adCase Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adAll latch & hinge pins are stainless steel. Easily convert the case from a 5 pistol version to a 4 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths.
More information #ad
Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size. Base foam is heavy duty, pre-cut, non-abrasive, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Case is 100% shippable and airline approved for TSA checked luggage. Wide bodied snap latches can be used with thick gloves. Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Case has a lifetime warranty, is 100% waterproof ip67 & dustproof with a built-in pressure release valve. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Height | 7.48 Inches |
| Length | 19.75 Inches |
| Width | 15.53 Inches |
| Part Number | ASSYCC171163ISKPIS5 |
More information #ad
5. Case Club
#adCase Club Pre-Cut 4 Pistol & Accessory Carrying Case
#adCan accommodate underbarrel attachments such as flashlights or lasers. Not intended for revolvers. Pistols and accessories not included. Do not settle for cheap and flimsy diced foam! diced foam tears easily, collects dirt, lasts a lifetime, can be cleaned easily, retains water rust!, and even if left untouched will eventually DISINTEGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does not tear easily, and will NOT disintegrate.
More information #ad
Accommodates subcompact up to full-size pistols max allowable length of pistol is 8. 625".| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Height | 6 Inches |
| Length | 17 Inches |
| Width | 12 Inches |
| Part Number | CC6792CCFLPIS4A |
More information #ad
6. Case Club
#adCase Club 4 Revolver Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust
#adMore information #ad
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC630SEREV4 |
More information #ad
7. Case Club
#adCase Club 4 Rifle or Shotgun Waterproof Shipping Case fits Multiple Guns & 3 Pistols Along with Included Silica Gel Canister to Prevent Gun Rust
#adCase has wheels. Two padlock points that support a customer supplied padlock with a 1/4" shackle. Accommodates optics including scopes & under barrel attachments, Pistol optics & red-dots, and Grip fins & lasers, foregrips including vertical foregrips and angled foregrips, under barrel attachments including flashlights & featureless rifles.
More information #ad
Case will weight about 75 lbs loaded with guns. Case will likely not fit large side attachments, Side by Side Barrels, Bipods, or Large bolts that stick out the side. Max overall gun height is 11. 13". 100% waterproof IP67 & Dustproof. Case has a lifetime warranty. Foam is heavy duty, mil-spec, non-abrasive, pre-cut, closed cell polyethylene which won't absorb moisture or oil. Case is 100% shippable and airline approved for TSA checked luggage.
| Brand | Case Club #ad |
| Model | 4 Rifle/Shotgun |
More information #ad
8. Case Club
#adCase Club 6 Pistol and 21 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust Upgraded Gen-2
#adDual purpose foam design allows for two different configurations for the price of one! Extended front handle length helps counter balance off center weighted loads. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.
More information #ad
Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states. Magazine compartments are dual level & double stack mags of varying lengths. Base foam is heavy duty, closed cell polyethylene which won't absorb moisture or oil. Case has a lifetime warranty, mil-spec, non-abrasive, pre-cut, is 100% waterproof ip67 & will fit both single & Dustproof with a built-in pressure release valve. Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Holds 6 pistols, 21 magazines +6 more in the magwells & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC181373ISKPIS6 |
| Model | 6 Pistol Case |
More information #ad
9. MY CASE BUILDER
#ad5 Pistol 18 Magazine Doro Gun Case with Custom MyCaseBuilder Foam Insert, Tactical Firearms and Ammunition Holder, Waterproof, Heavy Duty, 18 x 14 x 7 Inches, Black Case w/Black Foam
#adLightweight & strong: heavy duty injection molded case is impact and crush resistant yet lightweight for easy transport; Can fit multiple handguns, magazine clips, pistols, your favorite extensions, and other firearm accessories.
More information #ad
Military grade foam: keep your firearm safe and sound with our premium 5 pistol and 18 magazine carry case; Each case features a heavy-duty Doro hard case with a customizable closed-cell polyethylene foam insert; Foam is chemical and oil resistant and can be easily wiped clean. Tsa approved: our dual-padlockable case Fits 0313" shackle is travel-friendly and compliant with TSA regulations for flying with firearms. Ip67 rated: waterproof, dustproof and airtight with pressure equalization valve.
| Brand | MY CASE BUILDER #ad |
| Manufacturer | MyCaseBuilder.com #ad |
| Height | 7.06 Inches |
| Length | 18.25 Inches |
| Weight | 6.08 Pounds |
| Width | 14.37 Inches |
| Part Number | D1611-G601 |
| Model | D1611-G601 |
More information #ad
10. MY CASE BUILDER
#adTactical Firearms, 4 Pistol 12 Magazine Doro Gun Case with Custom MyCaseBuilder Foam Insert, Heavy Duty, Waterproof, and Accessory Holder, Black Case w/Red Topper, 18 x 14 x 7 Inches, Ammunition
#adBuilt to last: each case has a lifetime warranty, is IP 67 rated and dustproof; Our heavy duty carrying cases are made in Italy and are great for storage, traveling, or taking with you to the shooting range.
More information #ad
Ip67 rated: waterproof, dustproof and airtight with pressure equalization valve. Military grade foam: keep your firearm safe and sound with our premium 4 pistol and 12 magazine carry case; Each case features a heavy-duty Doro hard case with a customizable closed-cell polyethylene foam insert; Foam is chemical and oil resistant and can be easily wiped clean.
| Brand | MY CASE BUILDER #ad |
| Manufacturer | MyCaseBuilder #ad |
| Height | 6.93 Inches |
| Length | 18.27 Inches |
| Width | 14.41 Inches |
More information #ad
