Top 10 Ade Advanced Optics Huracan – Gun Sights

As an Amazon Associate I earn from qualifying purchases.

1. Ade Advanced Optics

#ad

Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun

#ad
Ade Advanced Optics #ad - We have made it more durable to withstand recoil and improved the ability to hold zero. We have made several improvements since it's initial release in 2016. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.

This green dot comes with a picatinny mounting base. Ade rd3-006, docter, rd3-013, rd3-009, insight, burris fastfire, rd3-012, meopta, rd3-015 are designed to fit the slide/footprint of plate made for vortex Venom, Eotech MRDS. Any plate made for those brands also fits this sight. Rd3-011 only Fits Trijicon ftprt. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief.

It is fits directly to "optics ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. Designed in Oregon. This green dot comes with a picatinny mounting base. It also fits canik using canik provided #1 mount, however the front switch of the sight needs to trim down 2mm.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Weight0.4 Pounds
Part Numberrd3-006A-HURACAN
Modelrd3-006A-HURACAN

2. Ade Advanced Optics

#ad

HellcatNon-OSP Pistol, MOD.2,XDm,XDS,XDE, Ade Advanced Optics Huracan RD3-006x Green Dot Reflex Sight + Optic Mounting Plate for Springfield XD

#ad
Ade Advanced Optics #ad - It is rain resistant, but not waterproof. While it is possible to install this mount without the use of a Gunsmith, not holding zero, we recommend hiring a professional gunsmith. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.

Huracan rd3-006 green dot reflex sight. It does nOT fit 5. 25″ xdm competition series, XD3. 3"/3. 8" single stack, XDE 3. 8xd mod. 2, it does not fit any OSP optics ready models. 3 moa. Please note. 5 illumination settings. Unprofessional installation such as improper torque will result in screw loose, damage to the firearm/optic and personal injury.

Shock/fog proof. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. Also comes with ade all new designed adapter mount for springfield xd, xdm, hellcat non-OSP Pistol. Comes with a picaitnny mount.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-006+NewXD

3. Ade Advanced Optics

#ad

Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun, FDE/TAN Body Color

#ad
Ade Advanced Optics #ad - Rd3-019, rd3-009, rd3-023 fits RMR footprint. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. This ade’s fde color will not 100% match every fde color handgun on the market because every handgun company made their FDE color proprietary, it will look great even the color might be slightly darker or lighter.

Ade rd3-006, rd3-013, docter, rd3-015 are designed to fit the slide/footprint of plate made for venom, rd3-012, insight, rd3-020, meopta, fastfire, . Any plate made for those brands also fits this sight. Rd3-018 only fits rmS/RMSC footprint. This fde/tan body color green dot is one of ade's newest product in 2022. It is also compatible to optics ready pistols such as glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plateSOLD SEPARATELY.

Comes with cr2032battery, wheel dial reference tool, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, screw driver, protective cover, allen wrench, anti-flickering robber shim.4 moa. Ade is now offering fde body color optics for several of ade’s popular red dot models. Powered by a lithium CR2032 batteryIncluded.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-006B-FDE1

4. Ade Advanced Optics

#ad

Ade Advanced Optics Huracan RD3-006 Green Dot Sight + Optic Mounting Plate for 1911 Novak Rear Sight Pistol

#ad
Ade Advanced Optics #ad - Full metal construction with glass lens. We recommend hiring a professional gunsmith. Standard, novak standard/traditional and Novak Oversize rear sight. Comes with an ade rd3-006 green dot sight, a picatinny platepre-assembled, and a optic mounting plate designed to fit 1911 pistols with standard Novakdoes NOT fit Novak OVERSIZE rear sight cut by replacing the factory rear sight on standard NOVAK dovetail.

One of the advantage of this ade plate over others is this optic plate has a CURVED design that will sit flushwrap the top curved pistol slide on the top of the pistol. Unprofessional installation such as improper torque12in/lb will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.

Please note. It will disconnect the red dot from the picatinny mounting plate. 1911s have several different rear sight dovetail cuts, lpa, such as coltg. I. Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911. 22s. Gunsmith experience is required. This ade rd3-006 green dot comes with a picatinny mounting plate pre-assembled might be packaged separately in the retail package, depends on the ADE model. 4 moa.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-006+Novak Plate

5. Ade Advanced Optics

#ad

Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun

#ad
Ade Advanced Optics #ad - Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short.

Powered by a lithium CR2032 battery. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. It also fits canik using Canik provided mount marked for Doctor/Venom type red dot. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail.

This huracan green dot sight fits directly to optics ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. Multi Illumination Settings. Ade rd3 006, insight, rd3 013, rd3 012, docter, rd3 009, meopta, rd3 015 are designed to fit the slide/footprint of plate made for vortex venom, burris Fastfire, Eotech MRDS. Any plate made for those brands also fits this sight.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Weight0.4 Pounds
Part Numberrd3-006A
Modelrd3-006A

6. Ade Advanced Optics

#ad

Ade Advanced Optics RD3-006B-2 Green Dot Micro Mini Reflex Sight for Handgun …

#ad
Ade Advanced Optics #ad - 4 moa. Any plate made for those brands also fits this sight. Ade model rd3-006, docter, meopta, burris fastfire, rd3-009, rd3-012, insight, rd3-015 are designed to fit the slide/footprint of plate made for vortex Venom, RD3-013, Eotech MRDS.

We have made several improvements since it's initial release in 2016. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. We have made it more durable to withstand recoil and improved the ability to hold zero. This green dot comes with a picatinny mounting base.

Multi Illumination Settings. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Powered by a lithium CR2032 batteryIncluded. Newly updated front switch designed in Oregon.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-006B2

7. Ade Advanced Optics

#ad

Ade Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun

#ad
Ade Advanced Optics #ad - We have made it more durable to withstand recoil and improved the ability to hold zero. It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. It is also compatible with varies handgun mounting plates that replace rear sight dovetail.

Powered by a lithium CR2032 batteryIncluded. 3 moa. Designed in Oregon. We have made several improvements since it's initial release in 2016. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Any plate made for those brands also fits this sight. Multi Illumination Settings. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.

Ade model rd3-006, burris fastfire, rd3-012, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, Meopta, rd3-009, rd3-013, Insight, docter, Eotech MRDS. This green dot comes with a picatinny mounting base.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-006B
ModelRD3-006B

8. Ade Advanced Optics

#ad

XDS Pistol, XDM, XDM, Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XD MOD.2, XDE

#ad
Ade Advanced Optics #ad - Does not fit 5. 25″ xdm competition series. It also fits Non-OSP Hellcat. This small dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.

This brand new designed optic mounting plate is to replace the rear sight of pistol. This plate is for replacing rear sight. Including two align pins to attach to any of the four corner holes to prevent any movement. It does nOT fit 5. 25″ xdm competition series. Also fit vortex venom/razor/viper, rd3-006BCobra, RD3-013Bertrillium, Insight, Sightmark Minishot. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.

New design in 2020 Specially made to fit Springfield XD, XD MOD. 2, xdm, xds pistol. Hiring a gunsmith is highly recommended, unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Fit ade rd3-006ahuracan, docter, burris fastfire, rd3-012delta, eotech mrds, meopta, rd3-009crusader, rd3-015ZantitiumRed dots.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberNewSpring-XD

9. Ade Advanced Optics

#ad

Ade Advanced Optics Optic Mount Plate for Taurus PT111 G2, meopta, burris fastfire, G2, docter, Millennium G2, Insight Red Dot Reflex Sight, G3 and TX22 to fit on Vortex Venom, eotech mrds

#ad
Ade Advanced Optics #ad - We highly recommend diy only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. It does not fit the sights with Shield RMSC and trijicron rmr footprint. Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.

Machined from aircraft grade aluminum with hard anodizing finish. Also fit vortex venom/viper, rd3-013bertrillium, Eotech MRDS, RD3-009Crusader, Sightmark Minishot and similar red dots. Comes with screws and hardware for installation. This optic plate is made to replace the rear sight of g2c, G2, PT111 G2, G2s, Millennium G2, and TX22 Pistols. This plate also fits Taurus G3 with Original Rear sightsee photo.

Update: inventory has fixed as of dec 28th. Fit ade rd3-006ahuracan, burris fastfire, docter, rd3-012delta, insight, meopta, rd3-006bpython, rd3-015zantitiumred dots. This plate does not fit g3 with newer factory steel sight, g3c, please search "ADE G3C/GLOCK PLATE" on amazon. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. All new shipment will be machined correct to fit tx22.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberG2 Plate -1

10. Ade Advanced Optics

#ad

Ade Advanced Optics RD3-011A Avenger Red Dot Sight with Individual Brightness Increase and Decrease Buttons

#ad
Ade Advanced Optics #ad - Shock proof, rain proof and fog proof. Feature 1 M. O. A wind age and elevation adjustments with audible click. Dimension: 2. 68"x1.

5"x1. 9". Operates with 2023 Battery. Exit pupil: 22-33 mm. Weight net: 115g 4. 0 ounce. Red dot with multi brightness level with one adjustment button to turn the brightness up and one adjustment button to turn the brightness down. Light and compact, heavy duty, designed for real Fire caliber . Integrated 21mm Weaver mount base. Magnification: 1. 0x. Lens is over 1/2 thick and made of impact resistant lens optical grade glass. 2 years manufacturer limited Warranty. 3 moa dot, light and compact.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Weight0.2 Pounds
Part NumberRD3-011A
ModelRD3-011A