As an Amazon Associate I earn from qualifying purchases.
Scalarworks #ad - Compatibility: rifles with mil-std-1913 picatinny Rail; Ring diameter: 30mm; Height: 1. 57". Quantum quick-detach mechanism: Quantum Quick-Detach mechanism is completely recoil proof, while requiring only enough torque to firmly clamp onto a Picatinny rail.
Ultra high-performance scope mount: Designed for shooters who want the lightest, most rigid, easiest to use, and least obtrusive quick-detach scope mount possible.
Vortex #ad - Weighs 6. 7 ounces. Weighs 6. 7 ounces. The cantilever ring mount positions the center of the riflescope tube at a height of 1. 59 inches 4039 mm from the base.
WARNE #ad - Country of Origin : United States. Package dimensions: 1016 h x 2. 54 l x 5. 08 w centimetres. Precise, rugged, and easy to use. Package weight: 0045 kilograms.
Nightforce Optics #ad - Unique design - this scope mount features a cnc machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. X-treme duty unimount - nightforce ultralite unimount is a tough, reliable mounting system that doesn't add substantial weight.
Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb. This unique design and construction provides the performance of steel at half the weight.
Note - clean all mating surfaces thoroughly before mounting. Specifications - these x-treme duty unimount scope ringmounts are for 30mm scope tubes, and feature a 20 MOA taper; Available in different heights: 1. 125", 1. 375" and 1. 5". It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
UTG #ad - Radiuses edges and corners to prevent snagging, Scratching, or tearing of other gear and for effortless access to scope wind age and elevation turrets.
22mm saddle height, 112mm base length, 50mm offset distance, high profile fits 30mm tube optics with up to a 73mm outer objective diameter. Single mount utilizes locking torn screws and square-shaped Integral recoil stops for a secure zero hold.
Monstrum #ad - Offset design with a full 2 inches of forward extension, giving you maximum flexibility for scope placement and eye relief. Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
High profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights.
Vortex Optics #ad - Our precision matched rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These vortex precision matched rings position the center of the riflescope tube at a height of 1.
26 inches 32 mm from the base. These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.
Monstrum #ad - High profile in height with 22 mm of clearance from the top of your rifle to the bottom of your scope tube. Sturdy 1 inch diameter scope rings for use with standard 1 inch scope tubes. Torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.
Monstrum #ad - Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount. 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.
1. Vortex
#adExtra High Height 1.54 Inches | 39.1 mm, Black, Vortex Optics Pro Series Riflescope Rings, 30mm
#adVortex #ad - 9 oz. Weight per ring: 53. 8 grams - 1. Pro series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency. 1 mm from the base. These vortex pro series rings position the center of the riflescope tube at a height of 1.More information #ad
54 inches 39. Fits weaver and Pica tinny Rails. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting. The finishing touch to your rifle and optic combination. Sold two rings per package.| Brand | Vortex #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 9.1 Inches |
| Length | 9.1 Inches |
| Weight | 0.2 Pounds |
| Width | 9.1 Inches |
| Part Number | PR30-XH |
| Model | PR30-XH |
| Warranty | Manufacture Warranty |
More information #ad
2. Scalarworks
#ad30mm, Scalarworks Lightweight Ultra High-Performance QD LEAP/Scope Mount, 1.57" Height
#adUltra high-performance scope mount: Designed for shooters who want the lightest, most rigid, easiest to use, and least obtrusive quick-detach scope mount possible.
More information #ad
Light made right: engineered to be the lightest QD scope mount, without compromising an ounce of strength. Level headed: the leap includes our proprietary leveling screw to help you conveniently square your scope with your mount.| Brand | Scalarworks #ad |
| Manufacturer | Scalarworks #ad |
| Weight | 0.35 Pounds |
| Part Number | SW0700 |
| Model | SW0700 |
More information #ad
3. Vortex
#ad2-Inch Offset, Vortex Optics Sport Cantilever 30mm Mount
#adMore information #ad
Use this cantilever mount for mounting 30 mm telescopic sights. Aluminum construction. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.| Brand | Vortex #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 2.29 Inches |
| Length | 7.49 Inches |
| Weight | 0.42 Pounds |
| Width | 3.69 Inches |
| Part Number | CM-202 |
| Model | CM-202 |
| Warranty | Unlimited, unconditional lifetime warranty. |
More information #ad
4. WARNE
#adMatte Black, High, Warne Scope Mounts Maxima Horizontal, Optic Rings, 30mm, PA
#adMore information #ad
| Brand | WARNE #ad |
| Manufacturer | Warne Scope Mounts #ad |
| Height | 1.57 Inches |
| Length | 1.57 Inches |
| Width | 1.57 Inches |
| Part Number | 515M |
| Model | 515M |
| Warranty | SEE MANUFACTURER |
More information #ad
5. Nightforce Optics
#adA221, 1.5in High, Black, 20 MOA Taper, 30mm Rings, Nightforce Optics X-Treme Duty Ultralite Unimount Scope Mount
#adUse a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb. This unique design and construction provides the performance of steel at half the weight.
More information #ad
Precise tolerances - precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened. Note - clean all mating surfaces thoroughly before mounting. Specifications - these x-treme duty unimount scope ringmounts are for 30mm scope tubes, and feature a 20 MOA taper; Available in different heights: 1. 125", 1. 375" and 1. 5". It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
| Brand | Nightforce Optics #ad |
| Manufacturer | Nightforce Optics #ad |
| Height | 2.5 Inches |
| Length | 7.5 Inches |
| Width | 3.4 Inches |
| Part Number | A221 |
More information #ad
6. UTG
#adHigh, UTG ACCU-SYNC®30mm Integral Picatinny Rings, Matte Black
#ad22mm saddle height, 112mm base length, 50mm offset distance, high profile fits 30mm tube optics with up to a 73mm outer objective diameter. Single mount utilizes locking torn screws and square-shaped Integral recoil stops for a secure zero hold.
More information #ad
Precision cnc machined from aircraft grade aluminum with a Matte Black anodize, designed to fit on MIL-STD-1913 Pica tinny rail platform. Designed with significant lightening cuts to massively reduce weight without compromising durability.| Brand | UTG #ad |
| Manufacturer | Leapers, Inc. #ad |
| Height | 3.5 Inches |
| Length | 7.5 Inches |
| Weight | 0.35 Pounds |
| Width | 2.5 Inches |
| Part Number | AIR32250 |
| Model | AIR32250 |
More information #ad
7. Monstrum
#adMonstrum H-Series Offset Picatinny Scope Rings | 1 inch Diameter
#adHigh profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights.
More information #ad
Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil. For mounting 1 inch diameter scope tubes to standard Picatinny rail platforms.| Brand | Monstrum #ad |
| Manufacturer | Monstrum #ad |
| Part Number | ZRR-2-B |
More information #ad
8. Vortex Optics
#adVortex Optics Precision Matched Rings 30mm, Height 1.26 inches, Picatinny Mount
#ad26 inches 32 mm from the base. These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.
More information #ad
Hex wrench included. Will only work with Picatinny spec mounts—will not work with Weaver mounts. We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill. Sold two rings per package. Made in the USA.| Brand | Vortex Optics #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 1.88 Inches |
| Length | 3.5 Inches |
| Weight | 0.16 Pounds |
| Width | 5 Inches |
| Part Number | PMR-30-126 |
| Model | PMR-30-126 |
| Warranty | Unlimited, unconditional lifetime warranty. |
More information #ad
9. Monstrum
#adMonstrum High Profile Picatinny Scope Rings with See Through Base | 30 mm Diameter | Black
#adMore information #ad
Base is compatible with all Picatinny mounting systems | Not compatible with Weaver mounts. All monstrum tactical Lockdown Series rings and mounts include a lifetime guarantee.| Brand | Monstrum #ad |
| Manufacturer | Monstrum #ad |
| Part Number | ZR30-H |
More information #ad
10. Monstrum
#adMonstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter | Black
#adMore information #ad
5 inches of spacing between the rings. Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes. 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position. Mounts to any flat top Picatinny rail equipped rifle.| Brand | Monstrum #ad |
| Manufacturer | Monstrum #ad |
| Part Number | ZR301-B |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
